Turbidity sampler
Taking turbidity samples across the entire chute cross-section from vertical, pressure-free pipes.
Thanks to the different track lengths and bucket sizes, this sampler can be adapted to all pipe diameters and channel dimensions and also leaves nothing to be desired in terms of the throughput rate to be sampled.
Advantages
- Design that allows very good adaptation to the given local conditions
- A high tolerance to impurities contained in the product flow
- Drive of the bucket truck via rubber block chains or toothed belts
- Full integration of the sampler into the channel transfer
- Variable travel speeds of the sampler via frequency converter
Operating behavior & mechanical features
The spoon sampler is used to sample materials at the gutter or pipe transfer point.
Representative sampling of turbidity is carried out using a sample spoon, which is guided through the material flow in a linear motion at a constant speed. While the sample spoon moves through the suspension flow, a partial flow is continuously separated and discharged via the outlet pipe. The sample material obtained in this way can be collected and further processed via a collecting chute.
The spoon sampler passes through the suspension flow from one of the two waiting positions and stops in the opposite position. The waiting position of the sampling spoon between two withdrawals is inside the material chamber but outside the suspension flow.
Main product flow, so that direct contact between the sample spoon and the material flow is avoided, no installation disturbs the material flow and the sample spoon is not exposed to unnecessary wear.
Gallery
Spoon sampler for turbidity - ore concentrate
Spoon sampler for turbidity
Spoon sampler for turbidity
Spoon sampler LPN-T for ore concentrate
Spoon sampler for turbidity - ore concentrate
Spoon sampler for turbidity - 3D principle sketch
Slotted-vessel samplers
The Slotted-vessel sampler, also known as a slotted-vessel sampler, is used to sample materials at the belt head or at the belt transfer point.
Downpipe slot vessel sampler
Removal of fine-grained, non-abrasive bulk material samples across the entire chute cross-section for low installation heights.
SIEBTECHNIK TEMA on site
Find the right contact for your region.
How can we help you?
We have the right solution for every task. And if not, we’ll work with you to find one. Get in touch with us!
Our specialists will be happy to advise you individually on site or remotely, and are available to answer any questions you may have. Send us a message using our
Unit Operations
Industries
Service
Helpful
© 2024 - SIEBTECHNIK TEMA GmbH