Jaw crusher – Laboratory
Our jaw crushers for coarse crushing of brittle, medium-hard to hard materials are now also available with an integrated divider.
The Multi-purpose mill UM 150 is used for the fine grinding of dosed, dry, brittle, medium-hard materials < 15 mm up to a Mohs hardness of approx. 6.
How does the Multi-purpose mill work?
The comminution effect is based on an impact, bounce and shear stress that is generated between the fast-rotating rotor and the toothed grinding track.
Advantages
- Low-wear and low-maintenance design
- Overgrinding of fine material is avoided
- Grinding chamber and cyclone can be fully inspected for inspection/cleaning
Operating behavior & mechanical features
Crushing & Milling of the fed material takes place until it can pass through the slotted sieve insert with the suction air. This prevents overgrinding of fine material that has already been produced. The shredded material, which is removed with the suction air, is then separated via a cyclone in a sample collection bottle (500 cm³). As an option, a tube can be screwed in via the opening in the base of the housing instead of the sample collection bottle, allowing a larger container to be installed underneath the machine.
For inspection and cleaning of the machine, the housing cover of the machine can be opened so that the grinding chamber and cyclone are fully visible. The damper-supported cover is monitored for the safety of the operator and causes the brake motor to stop immediately when it is opened. The slotted screen inserts, which are decisive for the fineness of the end product, can be inserted into the corresponding cut-out in the grinding track when the cover is open.
Gallery
Universal mill UM 150
Universal mill UM 150 grinding track with rotor and slotted sieve insert
Universal mill UM 150, grinding track - rotor removed
Universal mill UM 150
Universal mill UM 150 slotted sieve insert
Universal mill UM 150 - Rotor
Universal mill UM 150, various inserts
Two-roller mill – Laboratory
Gentle Crushing & Milling, production of small quantities of fines, hardly any increase in product temperature, rollers available in many materials.
Cone crusher
The Cone crusher as a slow-running crushing machine is used when, for example, cubic grain is to be produced, thermally sensitive products or very hard materials need to be crushed.
SIEBTECHNIK TEMA on site
Find the right contact for your region.
How can we help you?
We have the right solution for every task. And if not, we’ll work with you to find one. Get in touch with us!
Our specialists will be happy to advise you individually on site or remotely, and are available to answer any questions you may have. Send us a message using our
Unit Operations
Industries
Service
Helpful
© 2024 - SIEBTECHNIK TEMA GmbH