Test sieve shaker LAVIB
The LAVIB 300 test sieve shaker is primarily used for classifying fibrous and plate-like bulk materials, such as those found in the wood, spice, tobacco and plastics industries, as well as in milling and brewing.
Our large test sieve shakers are used to determine grain sizes larger than 40 mm. In test sieving, the amount of material to be sieved increases with coarser grain sizes, so the sieve surfaces must be adapted accordingly in order to carry out representative test sieving. For these tasks, we offer two machine sizes with screening surfaces of 500 x 500 mm and 1000 x 1000 mm.
Innovative app control
The new Large Analystical Screening Machines GAS can now be controlled with the innovative “Lab-Co” app and offer the user new possibilities. The machines are particularly impressive with the following features:
- Display of the oscillation amplitude
- Reading in weighing data via Bluetooth
- Evaluation of sieve analyses with graphical representation in a linear or RRSB diagram
- Standard Operating Procedures (SOP)
- Calling up the operating instructions
- Direct spare parts inquiry
- Sample/machine data can be exported as a csv file
- Updateable app and firmware
Advantages
Maintenance-free unbalance drive
Two unbalance motors generate the high oscillation amplitude required for this application.
Stainless steel sieve boxes
Low resonance
due to braked unbalance motors
Areas of application
The large test sieve shakers are designed for applications in which grain sizes larger than 40 mm must be reliably determined. As the quantities of material to be sieved increase with coarser grain size during test sieving, this must be compensated for by the sieve surface for representative test sieving. Two machines with screening areas of 500 x 500 mm and 1000 x 1000 mm are available for the respective task.
Operating behavior & mechanical features
The GAS has a maintenance-free double unbalance motor drive that generates a linear oscillation perpendicular to the screen plane.
By turning the unbalance disks on the motors, the vibration amplitude can be infinitely adjusted at standstill to achieve the optimum vibration amplitude for your application. The screen set is firmly clamped on the vibrating table via a clamping device, which can also be designed as a lifting and tilting device on request.
Equipment variants
As an option, the clamping rods for the GAS 1000 can also be designed as a lifting and tilting device. The screen tower clamped in this device is lifted by a crane so that the lowest screen box can be emptied by tilting.
The GAS 500 and GAS 1000 can also be used as a vibrating table
without a screen set.
Downloads
Gallery
By loading the video, you accept YouTube`s privacy policy. Click on the picture to load.
Airjet screen SLS
The Airjet screen SLS is used to classify products that are difficult to screen, especially in the particle size range < 250 µm
Sieve Shaker ASM
Our ASM sieve shakers are throw sieve shakers, they are used for the automatic sieving of all screenable bulk materials into individual grain fractions for the reproducible determination of grain size distributions.
How can we help you?
We have the right solution for every task. And if not, we’ll work with you to find one. Get in touch with us!
Our specialists will be happy to advise you individually on site or remotely, and are available to answer any questions you may have. Send us a message using our
Unit Operations
Industries
Service
Helpful
© 2024 - SIEBTECHNIK TEMA GmbH